Presenting High Quality
Swiss Flooring Products
Installation Tools
The Eiger Clamp and Eiger Bar
|
The Eiger Clamp is a rugged ratchet clamp designed to pull flooring planks together without pounding on the planks and without the clamp bending. It comes with a 20’ strap. Use two in tandem to clamp wider areas. Use a clamp every 3’ – 4’ for strip flooring. Less often for wider planks. |
| Call for pricing |
|
|
The Eiger Bar is a heavy duty ratchet clamp with a welded knocking block that can be used to pull planks together, pull long plank butt joints together or as a stand alone pulling bar for planks against walls. Eiger bars come with a 36’ strap. |
| Call for pricing |
|
|
The Eiger Clamp and Bar Tool Kit consists of six Eiger Clamps and one Eiger Bar in a tough lockable toolkit. Keep your clamps organized, clean and ready for your next project.
Call for pricing |
The use of sturdy ratchet clamps is recommended to facilitate the successful installation of your wood flooring. How many clamps are needed is generally a function of the type, size and quality of the wood flooring. For instance, long wide plank engineered flooring will require fewer clamps than 2 ½" strip flooring of various lengths machining quality. A rule of thumb would be a clamp approximately every 3' to 4' for narrow strip flooring and adjusting to fewer clamps as the flooring size and machining quality increases. They are especially useful on startup rows.
For purchasing information regarding the
Eiger Clamp, Eiger Bar, and Eiger Tool Kit,
please contact:
tools@eigerinternational.com
|
|
|
Eiger Clamps Doubled-Up
|
Eiger Clamp and Mullican Floor
|
|
Copyright © 2008 Eiger International, Inc.
