Landolt SurfaceLiner™ (formerly Floorliner) is a re-usable
multi-surface protective nonwoven that offers safe and highly effective
protection of floors of all kinds, including carpets, tiles, stairs
and furniture. SurfaceLiner™ is
produced in Switzerland and is nonwoven of synthetic fibers and
padded for protection against scratches and dents.
The top side with PE sheet acts as a barrier against liquids,
the rear side has a slip resistant coating. SurfaceLiner™
can be used on any surface. Eiger International, Inc. is the
sole importer and distributor in the United States of the multi-surface
Landolt SurfaceLiner™. Prices are FOB our Denver,
CO or Telluride, CO warehouses.
Advantages
Protects any horizontal or vertical surface.
Padded for protection against scratches and dents.
Waterproof for protection against liquids and acid.
Prevents dirt & gravel from damaging surface.
Anti-Skid on any surface, even when wet.
Strong & tear-resistant.
Re-Usable - Simply vacuum and roll it up for the next job.
Options
SurfaceLiner™ is offered in several variations
to meet the needs of the job:
SurfaceLiner™
absorb: Safely absorbs paint and other liquids. Reliably
absorbs liquids and stops them from soaking through to the
protected surface below.
SurfaceLiner™
vapor: Provides save and effective protection. Face
with vapor-transmitting PE sheet impermeable to liquids.
SurfaceLiner™
FR: Fire Retardant for those companies that require fire
retardant protection products.
When Installing SurfaceLiner™
Place plastic-film (glossy-side) upwards to protect against penetration by paints and liquids; Do not pull off the plastic film.
Overlap the seams by 2”- 4”. Tape the seams.
On full-surface-glue-down installations, the glue must be completely dry and cured. Follow glue manufacturers guidelines on chosen glue for complete curing times.
New finishes on hardwood floors must be completely dry and cured. Follow finish manufacturers guidelines on chosen finish for complete curing times.
Surface must be totally clean and dry before rolling out
SurfaceLiner™. Do not allow any moisture to be trapped
underneath.
Never use on newly laid porous stone or tile floors. Rising moisture could cause stains.
Covering up the flooring planks with sheet goods, such as
Masonite or plywood, to protect the flooring from damage, while
at the same time running the in-floor radiant heat can trap
the heat and overheat or “cook” the
flooring resulting in damage to the planks. Using the multi-surface
SurfaceLiner™ eliminates this problem.
On full-surface-glue-down installations, the glue must be completely dry and cured. Follow glue manufacturers guidelines on chosen glue for complete curing times. 